SDR2-CF/SDR2-OEM-CF Configuration Guide rev 1.0
Configuring the DataBridge SDR2-CF
11
2
2
2.
Configuring the
DataBridge
SDR2-CF
Now that you have access to the SDR2-CF’s menu system, you are ready to
configure it for use with your serial data source. Using the Configuration
menu, you can:
•
Set the date and time.
•
Specify a directory to record files to.
•
Specify a filename for recording.
•
Ensure that the media you are using is properly formatted and has
enough free space to accommodate your data.
•
Verify that the SDR2-CF and your device are communicating at the
same speed and with the same serial data format parameters.
•
Communicate with your serial data source connected to the device port.
•
Set up output messages for your serial device.
Before you begin, be sure you have the documentation available for the
device you’ll connect to your SDR2-CF. If possible, be sure you can
communicate with the data source using the supplied software and/or your
communications software. An intimate knowledge of your data source's
communications standards will make connecting it to the SDR2-CF simple.
