HD Intelligent IP Speed Dome Installation Manual Chinese V1.0
9
PTZ
control:
see details
in section
4.2.
Other ICONS
functions:
4.3. PTZ control
PTZ control interface is as shown in figure 4-4.
Attention: When control the PTZ, please go to system Settings – PTZ Settings configure the correct
protocol, address, baud rate, data bits and other information, otherwise will not be able to control
PTZ.
4
PTZ control can realize the following functions:
4.3.1 PTZ horizontal and vertical movement
Users can operate the up and down and oblique direction of the direction key to control the fluctuation
audio
client
screenshot
s
Close all
channel
Full
screen
Close all
channel video
All
channel
video
Open all
channel
Direction control key
Set running speed
"+" as focus near,
"-" as focus far
"+" : amplification, "-" : narrow
"+" wide open, click on the
picture gets brighter, "-"
aperture, click on the picture
darkened
From left to right:
preset point number,
call the preset point,
add the preset points,
delete preset point
From left to right: cruise line
number, call cruise between
points, stop points between
cruise, cruise video between
the set point
