HD Intelligent IP Speed Dome Installation Manual Chinese V1.0
11
4.3.4. Add and call preset
Preset point is network camera stores the current position and the lens focal length, aperture
parameters,etc in the memory, when it is needed can call these parameters quickly and adjust PTZ and
camera to the location of the function.
Network camera goes to the position of adding a preset point, fill in the preset point number, click
the“
”,add the preset point, up to 255 preset points can be added.
Preset point inputs a preset point number has been added successfully, click the“
”call the preset
point.
Preset point inputs a preset point number has been added successfully, click " "delet this preset
point.
4.3.5.add and call cruise
Cruise function is network camera composes the added multiple preset point to a route, stored in the
storage, can quickly call when needed, and make the network camera can along the route, in turn, go
by the added preset point and in each preset point for setting the length of time.
At point between cruise input a point to add the serial number.
Click on the "
", as the chart Settings box, add to the cruise line of preset point to the serial
number.
【Preset point】:choose the preset point number of which should add to the cruise line (should have
set the preset point).
【Interval】 during the cruise, the interval length of calling two preset points.
【increasing preset】: add the selected preset point to the serial number of the cruise line.
【remove preset point】: delete the serial number of the selected preset point in thecruise route.
【remove cruise line】: delete the serial number of the whole cruise route.
Select a route number which has been set, click the " "to call the cruise route.
Select a route number which is cruising, and click " " to stop the cruise.
4.4. Color Settings
4.4.1. Color setting
Set the picture color of the WEB side, as shown in figure 4-5.
