Carrier Grade GroomerII – Installation Guide
G.5
Refitting the PCI Riser Card Assembly
•
Ensure that the two blue handles on the PCI riser card assembly (“B”) are fully
raised.
•
Locate the forks on the rear of the PCI riser card assembly into the pins on the
inside of the chassis (“C”).
•
Push firmly down on the top of the assembly until it locks into position.
•
Slide the fan assembly back and then to the right to attach the fan assembly
to the riser card assembly
•
Refit the locking pin for the PCI fan assembly (“A”) being careful to ensure it is
fitted the correct way around.
•
Refit the PCI riser retention plate (“D”) over the power supply area and slide it
forward to lock it into place.
Figure G-4 Refitting the PCI Riser Card Assembly
42 of 44
