7
Select Measurement Units
To select between standard units (mph, ºF, etc.) or
metric units (kph, ºC, etc.):
1. Press the “
▲
“ or “
▼
“ buttons until “SET UNITS?” is
displayed on the Selectable Category part of the display.
2. Press the “ ” button to set the unit preference.
3. Press the “
▲
“ or “
▼
“ buttons to select “STAND” for
standard or “METRIC” for metric units.
4.
Press
the
“
”
button
to
confirm
your
selection.
5. Next, you will see “WIND MPH”. Press the “
▲
“ or
“
▼
“ buttons to select MPH, KPH, or KNOTS for wind
speed units.
6.
Press
the
“
”
button
to
confirm
your
selection.
Units are now set.
Set Language
To select between English (default) or French for the display language:
1. Press the “
▲
“ or “
▼
“ buttons until “SET LANG?” is displayed on the
Selectable Category part of the display.
2. Press the “ ” button to set the language preference.
3. Press the “
▲
“ or “
▼
“ buttons to select the desired language.
4.
Press
the
“
”
button
to
confirm
your
selection.
Language is now set.
Note: Display reverts to English language when display runs out of power or is reset.
Placement for Maximum Accuracy
AcuRite sensors are sensitive to surrounding environmental conditions. Proper
placement of both the display and the sensor are critical to the accuracy and
performance of this product.
Display Placement
Place the display in a dry area free of dirt and dust. To ensure
accurate temperature measurement, place out of direct sunlight and
away from heat sources or vents. Display stands upright for tabletop
use or is wall-mountable.
Important Placement Guidelines
Display and sensor must be within 330 feet (100 m) of each other.
MAXIMIZE WIRELESS RANGE
Place units away from large metallic items, thick walls, metal surfaces, or other
objects that may limit wireless communication.
PREVENT WIRELESS INTERFERENCE
Place both units at least 3 feet (.9 m) away from electronic devices (TV, computer,
microwave, radio, etc.).
