8
AcuRite Connect
AcuRite
Connect
works
with
Windows
PC’s
to
provide
access
to
your
Weather
Center data in the following ways:
Data File
: Display logs (or stores) data so that you can download it to a
PC
in
a
data
file
(CSV,
or
comma-separated
values
file).
Web Browser or Smartphone
:
Monitor
sensor
data
remotely
using
AcuRite’s
free AcuRite online software, or from a mobile device using the free AcuRite
app, available from the iOS App Store or Google Play Store.
Weather Underground:
This weather station is compatible for streaming data
to the Weather Underground Personal Weather Station Network. Navigate
to http://www.acurite.com/kbase/downloads/AcuRite-Connect.html for
more information.
USB Mode
To
set
up
AcuRite
Connect,
you
must
first
select
mode
3
on
your
display
to
gain access to all functionality. Modes 1, 2 and 4 are not used for the AcuRite
Connect software.
1. Press the “
▲
“ or “
▼
“ buttons until “SET USB MODE?” is displayed on the
Selectable Category part of the display.
2. Press the “ ” button to set the mode preference.
3. Press the “
▲
“ or “
▼
“ buttons to select USB mode #3.
4. Press the “ ”
button
to
confirm
your
selection.
AcuRite
Connect
USB
Mode
is now set.
Download the Software
The AcuRite Connect software is available online as a free download. A
manual (PDF) is included with the software download.
Before setting up the AcuRite Connect software,
verify that the display is ON with the
power adapter plugged in. Next,
connect the mini-USB (small end of
the cable) into the USB port on the
display, located inside the battery
compartment.
Download AcuRite Connect software to your computer by visiting:
1
http://www.acurite.com/kbase/downloads/
AcuRite-Connect.html
Or, navigate to the link above using the following path:
www.acurite.com > Support > Downloads > AcuRite Connect
2
Click
the
.exe
file
that
was
downloaded
in
step
1,
and
follow
the
on-screen
instructions to install the software.