Actuall DoorLIFT DL-6, Руководство по установке

Страница: 25 / 32

25
DoorLIFT DL - 6
Remote door system
10. Programming remote controls
Note: If applicable
1. When the power is turned on by connecting the battery cable to
the control box, within 5 seconds, press buttons 1 and 2 at the
same time. The system will erase the memory and then enter the
code learning mode. The UNLOCK OUTPUT will trigger to remind
you that the system is in code learning mode.
2. Within 5 seconds of entering the learning mode, press any button
on the transmitter. You will need to press the button on all the
transmitter you want to program to the system, because the me-
mory has been erased. The UNLOCK OUTPUT will trigger to tell
you the transmitter has been recognized and is compatible with
the system. A maximum of 12 transmitters can be coded per sys-
tem.
3. During code learning, if there is no action after 5 seconds, the
system will exit learning mode. The UNLOCK OUTPUT will sound
indicating its leaving learning mode.
4. If old FOBs have to be erased from the receiver's memory for any
reason, program the new FOBs with the above procedure and
don't include the old FOBs in this procedure. This process will
erase the old FOB data from the receiver's memory
2
1
Note : If the FOB battery has to be replaced
for any reason, the battery type is a dry
cell A23 type 12 Volt.
Installation guide