Actuall DoorLIFT DL-6, Руководство по установке

Страница: 17 / 32

17
DoorLIFT DL - 6
Remote door system
7. Use the two screws provided to secure the
exterior cover over the lock assembly.
8. Locate and secure the rear cable cover on the
mounting plate using the two 4,8x32 screws pro-
vided. This cover also acts as a clamp for the
60mm section of cable sleeve. Make sure the
cable sleeve ends in the middle of the lock. See
picture
9. Slide the cable sleeve up so there is a clearance
of 30mm to the red sleeve. Use the two 4,8x19
screws and plastic clamp to secure the cable
sleeve and clamp to the holes on the door con-
nector plate.
10. Make sure that the sleeve is only 50mm into the
guide tube and not protruding in the slot of the
motor - unit. This will prevent the lever from mo-
ving and the door cannot be disengaged anymo-
re.
Outside door
Installation guide
30mm