20
Operation Manual - (CP05 / CP10) Commercial Control Interface
Doc. No. 0525-031
Ver. 3 190308
DAYLIGHT SAVING TIME ENABLE ...
Display Progression
C. Mode of Operation
B. Setpoint
Main Menu 4/8
D. Clock / Scheduler
Clock
DST: ENABLE
Transition time: --- min
Start: --- --- ---
in --- --- --- at --- .00
End: --- --- ---
in --- --- --- at --- .00
Clock
DST: ENABLE
Transition time: --- min
Start: --- --- ---
in --- --- --- at --- .00
End: --- --- ---
in --- --- --- at --- .00
Clock
DST: ENABLE
Transition time: --- min
Start: --- --- ---
in --- --- --- at --- .00
End: --- --- ---
in --- --- --- at --- .00
Step 1
Step 2
Step 3
Step 4
Clock
DST: ENABLE
Transition time: 01 min
Start: --- --- ---
in --- --- --- at --- .00
End: --- --- ---
in --- --- --- at --- .00
Clock
DST: ENABLE
Transition time: 60 min
Start: --- --- ---
in --- --- --- at --- .00
End: --- --- ---
in --- --- --- at --- .00
Clock
DST: ENABLE
Transition time: 60 min
Start: --- --- ---
in --- --- --- at --- .00
End: --- --- ---
in --- --- --- at --- .00
Clock
DST: ENABLE
Transition time: 60 min
Start: FIRST SUNDAY
in --- --- --- at --- .00
End: --- --- ---
in --- --- --- at --- .00
Step 5
Step 6
Step 7
Clock
DST: ENABLE
Transition time: 60 min
Start: LAST SUNDAY
in --- --- --- at --- .00
End: --- --- ---
in --- --- --- at --- .00
Clock
DST: ENABLE
Transition time: 60 min
Start: FIRST SUNDAY
in --- --- --- at --- .00
End: --- --- ---
in --- --- --- at --- .00
Clock
DST: ENABLE
Transition time: 60 min
Start: FIRST SUNDAY
in JANUARY at --- .00
End: --- --- ---
in --- --- --- at --- .00
Clock
DST: ENABLE
Transition time: 60 min
Start: FIRST SUNDAY
in OCTOBER at --- .00
End: --- --- ---
in --- --- --- at --- .00
Step 7
Step 8
Step 9 (January)
Step 9 (October)
1. From the main menu, scroll down to
D. Clock
/ Scheduler
menu following the procedures
from "Setting the Clock" section.
2. Press
“ ”
Button to enter
D. Clock/
Scheduler
main menu.
3. Press
“ ”
Button to scroll down to
Daylight
Saving Time
sub-menu.
4. Press
“ ”
Button to enter
Daylight Saving Time
sub-menu
and the cursor
“ ”
will appear on
"ENABLE" indicator. If the indicator shows "DISABLE", press “
”
Button to change to "ENABLE".
5. Press
“ ”
Button again to enable
Daylight Saving Time
mode
and the cursor
“ ”
will move to
the "Transition time" segment.
6. Press
“ ”
or “ ”
Button to select the number of minutes for transition into daylight saving time..
NOTE
: The transition time can be set in 1 minute increment up to 60 minutes maximum.
7. Press
“ ”
Button to lock-in the selected length of transition time, i.e. 60min. The cursor “ ” will
next move to the order of the week (First, Second, etc..) for the start of transition to occur.
8. Press
“ ”
or “ ”
Button to select the "First", "Second", "Third", "Fourth" or "Last" for transition
into daylight saving time, e.g. FIRST.
9. Press
“ ”
Button to lock-in "FIRST" and the cursor “ ” will next move to the Day for the start of
the transition to occur.
Clock
DST: ENABLE
Transition time: 60min
Start: FIRST SUNDAY
End: FIRST SUNDAY
in OCTOBER at 2.00
in APRIL at 2.00
