ActronAir Classic 2 EAA130S, Руководство по установке и пусконаладке

Страница: 21 / 40

Installation and Commissioning Guide
Split Ducted Indoor Units
Installation and Commissioning Guide - Split Ducted Indoor Unit
Doc. No.0525-074 Ver. 3 200811
21
07. Unit Lifting Procedures
07.01. Crane Lifting Method
WARNING
WH&S regulations must be observed and will take precedence during lifting process.
DANGER
Make sure rigging equipment, accessories and plant are sufficiently and safely capable to lift the unit in order to prevent
potential damage to property, severe personal injury or death. Please check unit weight and weight distribution points on unit
drawing dimensions section.
NOTE
• Crane lifting method is recommended for high rise lifting.
• Refer to catalogue for unit weight before selecting shackles and slings.
• Lifting procedure and unit model shown are suggestions and for illustration purposes only.
• It is highly recommended that installer observe current industry safe rigging and lifting procedure.
DETAIL A
PALLET
INDOOR
UNIT
Slip nylon slings
through the pallet
Connect the loop ends
of slings into shackle FIGURE 1
A
Provide rubber pads to
prevent damage to the
unit
Equipment Required For Crane Lifting:
• 1 x Shackle
• 2 x Nylon Slings
•
4 x Rubber pads
NOTE
Refer to catalogue for unit weight before selecting shackles and slings.
Procedure:
1. Slip nylon slings through the pallet as shown in Fig. 1.
2. Use Bow or Dee shackle to connect the slings.
3. Ensure slings are protected by rubber pads or similar if slings are draped across unit edges, corners, or air grilles . This will
prevent the unit from being damaged during lifting.
4. Test lift the unit to determine exact unit balance and stability before hoisting it to the installation location.