Acto LX200, Руководство пользователя

Страница: 8 / 60

8
Part names and functions
Rear terminals
Rear
terminals
(1) AUDIO OUT
To the external audio amplifier.
Used to output audio signals from (2), (7), and (8).
Note: The impedance of the external audio amplifier should
be over 47k, or an earphone with lower impedance may
cause audio distortion.
(2) AUDIO IN
To the audio input of video equipment connected to (3) or
(4).
(3) Video/component input
To composite output signals (complex Y) or component
video output.
(4) S-VIDEO
To the S-Video output signals of a video device.
(5) VGA 1 input
To the RGB signals from a PC.
(6) Control terminal
To a PC with a serial control line when the projector is under
the control of the PC.
*(7) HDMI
To the HDMI digital output signals.
(8) Audio input
To the audio output from a video device connected to (5) or
(9). (Refer to Page 14~16.)
(9) VGA 2 input/monitor output
--To the computer output.
--Used to output the RGB analog signals input to the VGA 1
to other monitor.
*(10) Network
To the network cable.
*: Not available for several models.
7
9
8
6
10
1 5 4 3 2