Acto LX200, Руководство пользователя

Страница: 6 / 60

6
Safety guide
Air circulation
Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked or
covered.
Installing the projector in proper directions
Be sure to install the projector properly. Improper installation
may reduce the lamp lifetime and even cause a fire hazard.
Caution
Hot air is exhausted from the exhaust vent. When using or
installing the projector, the following precautions should be
taken.
–Do not put any flammable objects, or spray can near the
projector. Hot air is exhausted from the air vents.
–Keep the exhaust vent at least 1 m away from any objects.
–Do not touch a peripheral part of the exhaust vent, especially
screws and metallic part. This area will become hot while
the projector is being used.
–Do not put anything on the projector. Objects put on the
cabinet will not only get damaged but also may cause fire
hazard by heat.
Cooling fans are provided to cool down the projector. The
fan’s running speed is changed according to the
temperature inside the projector.
20°
20°
30°
30°
Do not roll the projector over 20 degrees from
side to side.
Do not pitch the projector over 30 degrees
backward and forward.
Do not point the projector up to project
an image.
Do not point the projector down to
project an image.
Do not put the projector on either side to
project an image.
Moving the projector
Air intake vent
Exhaust
vent
When moving the projector, cover the lens cap and retract the
adjustable feet to prevent damage to the lens and cabinet. Put
it into a pouch (provided) with the lens facing upwards if the
projector is not in use for a long period.
Caution in moving or transporting the projector
–Do not drop or bump the projector, otherwise damages or
malfunctions may result.
–When carrying the projector, use a suitable carrying case.
–Do not transport the projector by courier or any other transport
service in an unsuitable transport case. This may cause damage
to the projector. For information about transporting the
projector by courier or any other transport service, consult your
dealer.
–Do not put the projector in a case before it is cooled enough.
Air intake vent
Air intake vent