8
5 . Remove backing from
mounting plate adhesive
gasket .
6 . Center openings and press
mounting plate onto duct .
The adhesive gasket will hold
the mounting plate in place .
1/4
7 . Secure the mounting plate
using (8) #8 self-tapping screws .
8 . Insert unit into opening .
Be sure the air will pass
though the ActivePure
®
Cell
honeycomb matrix .
9 . Secure the unit to the
mounting plate with (4)
thumb nuts .
10 . Plug unit into working
power receptacle .
NOTE:
Unit requires power 24/7 . Do not install where power to the unit will be cycled on and off .
INSTALLING THE UNIT (CONT.)
4 . Cut hole in duct
using 3 .5" hole saw .