9
Charging the Device
The
Activ8rlives
Blood Pressure2 Monitor
contains a rechargeable Lithium polymer ion battery, which cannot be
replaced. Please do not attempt to open the unit to access the battery. The battery has been pre
-
conditioned and
charged for you but it will require a further charge for 2 hours before first use.
To maximise battery life, charge the device fully each time you recharge it, but do not leave it on charge for longer
than 8 hours once full charge has been achieved.
The
LOW
Battery Indicator will show on the LCD panel but it is advisable to allow the unit to run completely flat
between charges if possible. Under normal use, it can be recharged about 500 times. This is typically the life of this
devices Lithium polymer battery.
It takes approximately 2 hours to recharge. Only use the charging cable supplied.
DO NOT
use rapid chargers that produce a current over 1Amp
as this will reduce the number of charges your unit
can take and the life of the product.
DO NOT USE
the
Activ8rlives
Blood Pressure2 Monitor
during charging.
Note: Do not tamper or attempt to open the unit in which the rechargeable batteries are housed,
your warranty will be invalidated. Substances contained within the battery may damage the
environment or human health if handled and there is a risk of electrical shock or burns. When
disposing of this product and its integrated batteries, ensure that it is disposed correctly for special
treatment and not as normal household waste.
