ACTEON Equipment Satelec Implant Center 2, Руководство пользователя

Страница: 33 / 59

Identification of key areas common to all modes (Fig. 3):
- 4: Reduce the irrigation flow rate.
- 5: Increase the irrigation flow rate.
- 6: Reduce value.
- 7: Increase value.
Identification of information display areas common to all modes (Fig. 3)
- 2: Irrigation flow rate value.
- 9: Operating fault indicator.
Identification of key areas common to all modes that also display information (Fig. 3)
- 1: Flush/prime.
- 3: Irrigation ON/OFF.
- 8: Save, store data.
- 10: Select footswitch mode.
- 11: Handpiece light ON/OFF
- 12: Select mode (according to connected handpiece type).
Key areas and displays specific to the selected mode
P
IEZOTOME
mode :
Identification of information display areas (Fig. 4)
- 13: Selected program power level.
Identification of key areas that also display information (Fig. 4)
- 14: Select program: D1, D2, D3, D4.
N
EWTRON
mode :
Identification of information display areas (Fig. 5)
- 15: Selected program power level.
Identification of key areas that also display information (Fig. 5)
- 16: Select program: Soft, Medium, High, Boost.
Startup page :
Identification of key areas (Fig. 6)
- 17: Enter toolbox mode.
Toolbox :
Identification of information display areas (Fig. 7)
- 19: Audio volume symbol.
- 20: Screen brightness symbol.
- 21: Light off time-out symbol.
- 25: Relative audio volume value.
- 26: Relative brightness level value.
- 27: Selected time-out value.
- 28: Software version.
Identification of key areas (Fig. 7)
- 18: Reset factory configuration.
- 22: Reduce value.