Actel IGLOO PLUS Starter Kit, Руководство пользователя, Страница: 49 / 62

IGLOO PLUS Starter Kit User’s Guide 49
5
Programming
To program a design into the IGLOO PLUS evaluation board:
1. To program a design into the IGLOO PLUS evaluation board, attach the LCPS board to the IGLOO PLUS
evaluation board.
2. Attach a USB cable to the LCPS. This allows a programming data file, in programming database format (*.pdb) or
STAPL format (*.stp), to be downloaded via the FlashPro software to the Actel IGLOO PLUS device fitted to the
board.
3. A separate USB connection is required for the IGLOO PLUS Board if no other power source (power brick) is
attached to the IGLOO PLUS board.
4. When using the FlashPro software, the programmer to select is the FlashPro3. The LCPS is functionally equivalent
to a FlashPro programmer but designed specifically for use with the IGLOO PLUS Starter Kit.
5. Alternatively, an option (10-pin FP3 header) is provided to program the FPGA with a FlashPro3 instead
(
Figure 5-1 ).
Figure 5-1 · Schematic of JTAG header for Programming Directly with a FlashPro3
VJTAG [5]
VPUMP [5]
TMS [5]
TDI [5]
TRST [5]
TCK [5]
TDO [5]
TCK [5] TRST [5]
Mfr P/N :15-91-2100
Mfr: Molex
R38
1K R38
1K
1
3
5
7
8
6
4
2
9 10
J4
HDR_5x2_DNL
DNL
J4
HDR_5x2_DNL
DNL
R39
1K R39
1K
R66
0
R66
0
Downloaded from Elcodis.com electronic components distributor