ACTpro 3000 Operating Instructions
Firmware Version 1.24
2
Operator Menu
User Setup
Enable
Allow a user or range of users to open the door
Disable
Prevent a user or range of users from opening the door
Assign Names
Enter a name for each user
Assign Groups
Assign users to groups
Assign Options
Specify options for each user
Assign PINs
Set the individual PIN for each user
Learn Cards
Learn randomly coded cards (e.g. Bank Cards).
Batch Cards
Assign a batch of cards to a range of users.
One-To-One
Assign a card to a user.
Card Validity
Set a validity period for a user.
Group Setup
Enable
Allow users in specified groups to open the door.
Disable
Prevent users in specified groups from opening the door.
Assign Names
Enter a name for each group.
Access Rights
Specify what access rights apply to each group.
Assign Options
Specify output and PIN options for each group.
Assign PINs
Set the PIN for each Group.
Timed
Sets the Period for Timed Antipassback operation for
Antipassback
each group.
System Log
Display Log
Show the system log on the display
Print Log
Print the system log on an attached serial printer
Filter Log
Prevent events entering the system log
Control Door
Lock Door
Lock door - prevent all cards from opening it.
Unlock Door
Unlock door - relay is activated so cards are not required.
Normalise Door
Set a door back to normal operation
Pass Door
Momentarily open a door for the programmed time
AUX output on
Switches the auxiliary output on
AUX output off
Switches the auxiliary output off
User Tracking
Log in
Log a user into the tracking area
Log out
Log a user out of the tracking area
Clear All
Remove all users from the tracking area
Set Date/Time
Date/Time
Set the current date and time for the system.
Daylight Saving
Set the difference between GMT and local time.
Time Zones
Specify the time periods and days which apply to a given timezone.
Set Holidays
Specify which days within the next year are holidays.
Issue Number
Set the current system issue level (if issue checking option enabled).
Change PIN
Change the PIN used to access the operator menu.
Exit from the menu is automatic if no keys are pressed for a period of time.
