18
4.2.9 Daylight savings time
If enabled, the system will automatically assign the first
Sunday in April and the last Sunday in October as beginning
and ending dates of daylight savings. This will occur each
year without resetting. Time change will occur at 2:00 AM
on these dates. Dates may be changed in countries where
dates may be different. If not enabled, automatic daylight
change will
not
occur.
4.2.10 Time Clock terminal printer type
Used in the stand-alone mode when the terminal is to be
connected directly to a printer to print reports. Options
include None, Serial or Parallel. When using the PC
interface select type, “None.” May be used to print reports
from terminal
when using interface.
4.2.11 Date format
Select one of six date formats: (i.e. DDMMYY = 2 digit
date, month, year).
4.2.12 Time totals format
You may select employees total hours to print in Minutes
(half past the hour “30”) or Hundredths ( half past the hour
“.50”).
4.2.13 Time of day format
You may select hours to print in the AM/PM format (5:00
PM) or in the military format (5:00 PM will print “17:00”).
4.2.14 Day change offset
The time a new day begins. Default is set at midnight. Day
change can be moved forward or backward of midnight so
time worked can be credited to the day intended.
Setup
Содержание Time and Attendance System
Страница 1: ......
