manualshive.com logo in svg

Acroprint Time and Attendance System, Руководство пользователя

Поделиться
Скачать
Acroprint Time and Attendance System Скачать руководство пользователя страница 11

11

3. Terminal  installation

3.1 Electrical connections

Wiring connections for power, PC
interface or printer (stand-alone
mode) and mounting bracket can be
located by removing the terminal's
access door.

3.2 Terminal mounting

The Time Clock terminal is supplied with a reversible bracket on back
of the unit for desk or wall mounting. The unit is shipped with the
bracket in the desk mounting position. With the access door removed,
you are able to remove the bracket. Reverse the bracket and secure the
bracket to the wall with the four screws. Recommended distance from
floor to top of bracket is 54". The bracket has molded wire routing slots
and a center hub for securing wires using nylon ties. After the bracket is
fastened to the wall, mount the terminal on to the bracket. Complete
wiring connections and replace the access door.

3.3 Connecting Time Clock terminal to IBM compatible PC

1. Make sure power is off at both

the Time Clock terminal and
the PC, and the access door
on the terminal is removed.

2. Using the cable supplied with

the terminal (50'), connect the
RJ-11 modular connector to
the RS-232 port on the lower
left corner.

3. Connect the other end of the

RJ-11 to the 9-pin adaptor

Access Door

W

W

AND

AND

 RS

 RS

485

485

 RS

 RS

232

232

 9V

 9V

Terminal installation

Содержание Time and Attendance System

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды