![ACRONIS True Image Скачать руководство пользователя страница 93](http://html1.mh-extra.com/html/acronis/true-image/true-image_user-manual_2841355093.webp)
Troubleshooting
For more information visit
http://www.roxio.com/en/support/roxio_support/taketwo.html
I created an image on CD-R(RW) discs, but when I try to browse it
Acronis True Image Corporate Workstation tells me it can’t connect this
image as a virtual disk.
The current version of Acronis True Image Corporate Workstation can connect
images only if their files are located in the same place. If your image is located on
several CD-R(RW) or hard disks, you will have to copy all its files to the same
location on your hard disk.
If it is an incremental image, you will need all the previous images and the initial full
image.
Why I am unable to create images after SafeGuard Easy was installed?
Backing up disks/partitions, encrypted by SafeGuard Easy, will be possible after you
reinstall Acronis True Image Corporate Workstation. Acronis True Image Corporate
Workstation
is compatible with SafeGuard Easy, the only limitation is that it must be
installed after SafeGuard. The image will contain volumes without encryption.
I ran Acronis True Image Corporate Workstation from a bootable disk to
restore a partition (disk) from an image located on the network drive, but
couldn’t find the necessary computer.
If there’s at least one computer shown in the Network Neighborhood, try to access
the required computer by typing its address in the Filename line like
\\computer\folder.
If there’s no Network icon in the My Computer, it means either network problems,
or wrong drivers that Acronis True Image Corporate Workstation tries to use.
Contact our technical support (
) and provide all network
adapter specifications and manufacturer’s name.
I ran Acronis True Image Corporate Workstation from a bootable disk to
restore a partition (disk) from an image located on the network drive, but
it just kept asking me for username and password. What should I do?
In some cases, especially when there’s a domain controller installed in the network,
you have to specify computer or domain name before username. You must enter
username like COMPUTER\USER or DOMAIN\USER.
I received the "Can’t create image of disk D:, because it’s already used by
applications or contains bad sectors" error message, where D: stands for
my logical disk, when I tried to create an image under Windows.
Your logical disk might contain bad sectors. We recommend you to run a complete
disk surface test. Type “chkdsk /R D:” in the command line and reboot if needed.
How can I prepare Windows NT
SP6, 2000 or 2003 for cloning or
transferring to a workstation with different hardware?
Before you clone or transfer Windows to another workstation, you must prepare it
with Microsoft System Preparation Tool (sysprep). The reasons to do this are