SERIES I/O SERVER MODULE
MIL-STD-1553A/B Bus Interface Module
________________________________________________________________________
6
Acromag, Inc. Tel:248-295-0310 Fax:248-624-9234 Email:[email protected]
www.acromag.com
PREPARATION FOR USE
UNPACKING AND INSPECTION
Upon receipt of this product, inspect the shipping carton for evidence of mishandling
during transit. If the shipping carton is badly damaged or water stained, request that the
carrier's agent be present when the carton is opened. If the carrier's agent is absent
when the carton is opened and the contents of the carton are damaged, keep the carton
and packing material for the agent's inspection.
For repairs to a product damaged in shipment, refer to the Acromag Service Policy to
obtain return instructions. It is suggested that salvageable shipping cartons and packing
material be saved for future use in the event the product must be shipped.
This board is physically protected with packing material and electrically protected with an
anti-static bag during shipment. However, it is recommended that the board be visually
inspected for evidence of mishandling prior to applying power.
INSTALLATION
Power should be removed from the I/O Server when installing modules, cables, termination
panels, and field wiring.
CONNECTORS
Field I/O Connector (P2)
P2 provides the field I/O interface connections for mating IOS modules to the carrier board.
P2 is a 50-pin female receptacle header which mates to the male connector of the carrier
board. This provides excellent connection integrity and utilizes gold-plating in the mating
area. The field and logic side connectors are keyed to avoid incorrect assembly.
P2 pin assignments are unique to each IOS model (see Table 2) and correspond to the pin
numbers of the field I/O interface connector on the carrier board.
