13
needs to manually clear the data in the TF card, and clear
the TF card data. For details, see the MLOG indicator of
the expansion module of the 11 troubleshooting analysis
is not normal.)
Recording record
Voltage interruption, voltage swell, voltage sag, inrush
current waveform and measured value
TF card storage
status
No TF Card
：
No TF card, please refer to 11 failure
analysis for details.
TF Error
：
The TF card is damaged, and the data in the TF
cannot be written or read. For details, please refer to 11
Failure Analysis.
TF Full
：
The TF card storage is full and needs to be
manually cleared by the customer. For details, please
refer to 11 Failure Analysis.
Check Ini File
：
The APM800Config.ini configuration file
in the TF card is incorrect. For details, see 11 Failure
Analysis. The TF card storage is full and needs to be
manually cleared by the customer. For details, please
refer to 11 Failure Analysis.
The normal working status of the TF card is as follows:
Free Size:TF card remaining storage capacity
Total Size
：
TF card total capacity
Xx recording events are being stored, and the meter
displays that the recorded data is being synchronized to
the TF card.
parameter
settings
Input settings
Phase line, primary side voltage, secondary side, primary
side current, secondary side current, nominal voltage,
current, pulse constant, pulse output, voltage, current
shielding setting
Communication
settings
nstrument 485 address, baud rate, check digit, instrument
Profibus address, 645 address, TCP port, IP address,
subnet mask, default gateway settings
Alarm system
Alarm type, alarm action value, etc.
DO settings
DO channel, output selection and delay setting
AI settings
AI channel, type, decimal point, and numeric settings
AO settings
AO channel, type, decimal point, and numeric settings
Multiple
rate
setting
Time zone group selection setting, time period peak flat
valley setting, switching date setting
Recording setting
Trigger recording settings: impulse current, voltage
