Step 4: Install the Card
Step 4: Install the Card
1. Ensure that the host computer is switched off, and disconnect the power cord. Open the
host computer case.
Follow ESD precautions when handling and installing the SA108P.
2. The SA108P features a x8 PCIe bus interface, and should be installed in either a x8 or
x16 PCIe slot.
3. When installing the SA108P, ensure that it has optimum cooling. Do not install it in a
position where the integrated cooling fans may be obstructed.
4. Replace any covers and switch on the computer. Check the card front panel indicators - a
few seconds after the boot process the 'Status' LED.
12
Acqiris SA108P Startup Guide
