background image

Remember to register your product online at http://registration.sonnettech.com to be informed of future upgrades and product releases.

Software updates and links are available from the Sonnet web site at www.sonnettech.com. • Online support form available at http://supportform.sonnettech.com.

Sonnet Technologies Customer Service hours are Mon.-Fri., 7 a.m.–5 p.m. Pacific Time • Customer Service Phone: 1-949-472-2772 • E-mail: [email protected]

Sonnet Technologies, Inc., 15 Whatney, Irvine, California 92618-2808 USA • Tel: 1-949-587-3500 Fax: 1-949-457-6350

©2002 Sonnet Technologies, Inc. All rights reserved. Sonnet, the Sonnet logotype, Simply Fast, the Simply Fast logotype, and Tempo are trademarks of Sonnet Technologies, Inc.Tempo Trio includes technology by FirmTek, LLC.
Other product names are trademarks of their respective owners. All specifications subject to change without notice. Printed in the USA. QS-FWU2-W-E-112102

Quick Start Guide for Tempo Trio

You Should Have

The following items should be included in your product package:

• One Tempo Trio PCI Combo Card for Windows PCs

• One Ultra ATA Cable (supporting two internal hard drives)

• Eight screws (for mounting hard drives)

• One Tempo Trio Windows Drivers diskette

The following items may be required for installation:

• Medium Phillips screwdriver

• Small flat blade screwdriver 

• Needle nose pliers

• Drive mounting brackets/carriers or drive mounting sleds 

(sold separately) 

• One additional Ultra ATA Cable (sold separately)

• One or more power cable Y-adapters (sold separately)

You may need the following items to connect peripherals to the Tempo Trio:

• One or more FireWire (IEEE 1394) cables (sold separately)

• One or more USB cables (sold separately)

• One or more USB hubs (sold separately)

Hardware and Operating System Requirements

The Tempo Trio requires the following in order to operate in your system:

• One available PCI 2.1 slot

• Pentium II (or equivalent) or higher

• Windows 98SE, Windows Me, Windows 2000, or Windows XP

• One or more available drive bays (depending on configuration)

PCI Adapter Combo Card with ATA/133, FireWire

®

, and USB 2.0

For Windows

®

 PCs

.

Support Note:

We recommend that you make a backup of important

information on your system’s current hard drive(s) prior to installing new 

hardware or software. 

When handling computer products, you must take care to prevent components
from being damaged by static electricity. Before opening your computer or
removing parts from their packages, always ground yourself first by touching an
unpainted metal part of the computer, such as a port access cover, and work in
an area free of static electricity; avoid carpeted areas. Handle all electrical com-
ponents only by their edges, and avoid touching connector traces and compo-
nent pins.

Summary of Contents for TEMPO Trio

















Reviews: