©2017 ACP, Inc.
Cedar Rapids, IA 52404
Page 6 of 24
Part No. 20206401
Revised 01/11/2017
Grounding/Earthing Instructions
Oven MUST be grounded.
Grounding reduces risk of electric
shock by providing an escape wire for the electric current if an
electrical short occurs This oven is equipped with a cord having
a grounding wire with a grounding plug The plug must be
plugged into an outlet that is properly installed and grounded
Consult a qualified electrician or servicer if grounding instructions are not completely understood,
or if doubt exists as to whether the oven is properly grounded
Do not use an extension cord.
If the product power cord is too short, have a qualified electrician install a three-slot receptacle.
This oven should be
plugged into a separate circuit with the electrical rating as provided in product specifications. When
the combination
oven is on a circuit with other equipment, an increase in cooking times may be required and fuses can be blown
External Equipotential Earthing Terminal
(export only)
Equipment has secondary earthing terminal Terminal provides external earthing connection used in addition
to earthing prong on plug Located on outside of oven back, terminal is marked with symbol shown at right
Installation
STEP 1 - Unpack Oven
• Inspect oven for damage such as dents in door or inside oven cavity
• Report any dents or breakage to source of purchase immediately
Do not attempt to use oven if damaged.
• Remove all packing materials from oven interior
• If oven has been stored in extremely cold area, wait a few hours before
connecting power
• If you plan to program via Ethernet, remove plastic
plug from port on the right rear of oven Gently use
pliers if necessary
STEP 2 - Place Oven on Counter
• Recommended countertop surface depth is 26” (66 cm)
• Do not install oven next to or above source of heat, such as pizza oven
or deep fat fryer This could cause oven to operate improperly and could
shorten life of electrical parts
•
Do not block or obstruct oven filters. Allow access for cleaning.
• Install oven on level countertop surface
• Outlet should be located so that plug is accessible when oven is in place
STEP 3 - Install Rack
• Install oven rack
1 Oven cavity must be cool to touch
2 Place rack in oven with rear guard positioned toward the back of the
oven
⚠
DO NOT cook food directly on floor of oven.
Oven Clearances
A Allow at least 2” (51 cm) of
clearance around top of oven
Proper air flow around oven
cools electrical components
With restricted air flow, oven
may not operate properly and
life of electrical parts is reduced
B There is not an installation
clearance requirement for the
back of the oven
C Allow at least 1” (254 cm) of
clearance around sides of oven
D Install oven so oven bottom is
at least 3 feet (915 cm) above
floor.
A
B
C
D
⚠
WARNING
Excessive Weight Hazard
Use two or more people to move and
install oven
Failure to do so can result in back or
other injury
⚠
WARNING
To avoid risk of electrical shock or
death, this oven must be grounded
and plug must not be altered
Grounding and Installation
