WR-G+
54M Wireless Router User Guide
-
46
-
number. For example, if your Router's WAN address is 202.96.12.8 and you use port
number 8080, enter in your browser:
http://202.96.12.8:8080
. You will be asked for the
router's password. After successfully entering the password, you will be able to access
the router's web-based utility.
Note:
Be sure to change the router's default password to a very secure password
.
5.8.6 Advanced Security
Using Advanced Security page (shown in figure 5-40), you can protect the router from
being attacked by TCP-SYN Flood, UDP Flood and ICMP-Flood from LAN.
Figure 5-40 Advanced Security settings
¾
Packets Statistic interval (5 ~ 60) -
The default value is 10. Select a value
between 5 and 60 seconds in the pull-down list. The
Packets Statistic interval
value indicates the time section of the packets statistic. The result of the statistic
used for analysis by
SYN Flood
,
UDP Flood
and
ICMP-Flood
.
¾
DoS protection -
Enable
or
Disable
the DoS protection function. Only when it is
enabled, will the flood filters be effective.
¾
Enable ICMP-FLOOD Attack Filtering -
Enable
or
Disable
the
ICMP-FLOOD
Attack Filtering.
¾
ICMP-FLOOD Packets threshold: (5 ~ 3600) -
The default value is 50. Enter a
value between 5 ~ 3600 packets. When the current
ICMP-FLOOD
Packets
numbers is beyond the set value, the router will start up the blocking function
immediately.
¾
Enable UDP-FLOOD Filtering -
Enable
or
Disable
the
UDP-FLOOD
Filtering.
¾
UDP-FLOOD Packets threshold: (5 ~ 3600) -
The default value is 50. Enter a
value between 5 ~ 3600 packets. When the current
UPD-FLOOD
Packets numbers
is beyond the set value, the router will start up the blocking function immediately.
¾
Enable TCP-SYN-FLOOD Attack Filtering - Enable
or
Disable
the
TCP-SYN-
FLOOD
Attack Filtering.
