Acom 2S1, Руководство пользователя, Страница: 14 / 32

User's Manual | ACOM 2S1 | Automatic XCVR Commutator
Page 14 of 32 | S e c t i o n INSTALLATION June 2022
2. INSTALLATION
2.1.
Unpacking and Initial Inspection
Before you install your commutator, thoroughly read this manual.
First, carefully inspect the cardboard carton and its contents for physical damage.
ACOM ships commutator in protected container, but it cannot assure that mistreatment
by shippers will not occur. If damage is evident, notify your dealer immediately. Delay
may void the carrier's warranty.
Keep all packing materials for possible future commutator shipment (see Section
5.4.4 Returning to the
Service Provider
).
2.2.
Commutator Location Selection
Position the commutator near your transceivers or power amplifiers. You will need an easy access to the
LED indicators on the front panel, as well as to the rear panel cabling.
2.3.
Connections
Please, see
Figure 2-1 | Rear panel - Connections
.
Connections to your stations must be accomplished in the order described below.
Figure 2-1 | Rear panel - Connections
Figure 2-1 | Rear panel - Connections
b)
c)
d)
e)
d)
a)
e)