Acom 2S1 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 32

Acom 2S1 Скачать руководство пользователя страница 13

User's Manual | ACOM 2S1 | Automatic XCVR Commutator

June 2022

S e c t i o n GENERAL INFORMATION | Page 13 of 32

PRECAUTIONS:

DANGER

NEVER TOUCH AN ANTENNA or antenna insulators during transmission or tuning - this
may result in an electric shock or burn. NEVER EXPOSE the commutator to rain, snow or
any liquids.

WARNING

Do  not  undertake  on  your  own  repairs  or  changes  in  hardware  of  the  commutator  in
order  not  to  endanger  your  or  other's  health  and  life  and  not  to  damage  the
commutator  and  the  equipment  connected  with  it,  not  covered  by  warranty.  The
manufacturer is not  liable for another's actions and responsibility shall be  assumed by
the doer.

WARNING

To avoid damage (not covered under warranty) read the Section

2 INSTALLATION

of this

User's Manual carefully. If you have any doubts about the installation or safety of the
device, please, consult your dealer.

NOTICE

Some types of transceivers are not suitable to be directly used in the ACOM 2S1 XCVR
commutator system. If your transceiver does not have TXINHIBIT input, it cannot be
suited to the ACOM 2S1 XCVR commutator system (unless any modification is made
inside the transceiver to get such TXINHIBIT input).

Check your transceiver's manual or consult your dealer.

«
...
11
12
13
14
15
...
»

Содержание 2S1

































Отзывы:

Нет отзывов