Acom 2S1 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 32

Acom 2S1 Скачать руководство пользователя страница 11

User's Manual | ACOM 2S1 | Automatic XCVR Commutator

June 2022

S e c t i o n GENERAL INFORMATION | Page 11 of 32

1.6.

Safety Considerations, Explicit Definitions

The ACOM 2S1 commutator is intended for indoor use only.

The  ACOM  2S1  automatic  XCVR  commutator  is  designed  to  meet  international  safety  standards  and
complies with the CE safety and electromagnetic compatibility requirements.

The  ACOM 2S1  commutator  is designed  as  low-power  device that operates  at normal room temperature
and  do  not  require  a  protective-earth  connection.  The  device  is  powered  from  12  VDC  (fed  from
transceivers) and its consumption is below 30 mA.

This  User's  Manual  contains  information,  warnings  (signal  words

Danger

,

Warning

,

Caution

and

Notice

)

and instructions, related to hazards, that should be followed by the user in order to ensure safe operation
and to keep the device in a safe working condition at all times.

The EXPLICIT DEFINITIONS described below apply to this User's Manual:

DANGER

These notes call attention to a procedure or instructions which, if not correctly
performed,

will result in serious personal injuries and even death

.

WARNING

These notes call attention to a procedure or instructions which, if not correctly
performed,

could result in serious personal injuries and even death

.

CAUTION

These notes call attention to a procedure or instructions which, if not correctly
performed,

could result in minor or moderate personal injuries

.

NOTICE

These notes call attention to a procedure or instructions which, if not correctly
performed,

could result in property damage

or equipment damage not exclusively to

the commutator but also to connected equipment

.

«
...
9
10
11
12
13
...
»

Содержание 2S1

































Отзывы:

Нет отзывов