Tel. +49 (0) 36965 819–0
Fax +49 (0) 36965 819–361
5
Service-Line
ACO H a u s t e c h n i k
4. Assembly
3.4 Correct intended use
This device for measuring grease layer thickness is intended for installation in ACO grease separator plants as per
DIN EN 1825.
It displays 50 % and > 80 % of max. grease layer thickness in the grease separator.
A different use of the device is not permitted!
4.1 Disassembly of appliance
Step 2
> Remove evaluation device and gripper clamps from
measuring stick.
Step 1
> Loosen spigot nut of angle plug and remove from
measuring stick.
Evaluation device
Gripper clamps
Measuring stick
Spigot nut
Measuring stick
(not depicted)
Angle plug
Step 3
> Loosen bolts of gripper clamp.
> Take half-shell out of screw joint.
> Remove screw joint from the measuring stick.
Half-shell
Bolts
Gripper clamp
Measuring stick
(not depicted)
Screw joint
Product description and assembly
