4C
4-8 Send File Dump
NOTE
You must set up proper connection before you can send or receive the file dump.
1. With the power off, press and hold down the Scanner buttons
2, 3 and Scene button 1 at a time.
2. Apply the power again while pressing these three buttons,
the LCD shows "TRANSMIT" indicating this unit is ready to
send the file dump.
3. Press the Scene buttons 7 and 8 at a time to send the file
dump.
4. During the course of sending, if malfunction occurs, the
sending will be interrupted and the LCD shows "ERROR".
4-9 Receive File Dump
1. With the power off, press and hold down the Scanner buttons
8, 9 and Scene button 2 at a time.
2. Apply the power again while pressing these three buttons,
the LCD shows "RECEIVE" indicating this unit is receiving the
file dump.
3. When receiving is over, this unit will return to the normal mode.
Page 29
2
.
General Instructions
Please read the user manual carefully, as it includes important information regarding details of
operation, maintenance, and technical data. Keep this manual with the unit for future consult.
WARNINGS
！
DO NOT make any inflammable liquids, water or metal objects enter the unit.
Should any liquid be spilled on the unit, DISCONNECT the power supply to the
unit immediately.
STOP using the unit immediately In the event of serious operation problems and
either contact your local dealer for a check or contact us directly.
DO NOT open the unit--there are no user serviceable parts inside.
NEVER try to repair the unit yourself. Repairs by unqualified people could cause
damage or faulty operation. Contact your nearest dealer.
CAUTIONS
！
This unit is NOT intended for home use.
After having removed the packaging check that the unit is NOT damaged in any
way. If in doubt, DON'T use it and contact an authorized dealer.
Packaging material (plastic bags, polystyrene foam, nails, etc.) MUST NOT be left
within children's reach, as it can be dangerous.
This unit must only be operated by adults. DO NOT allow children to tamper or
play with it.
NEVER use the unit under the following conditions:
In places subject to excessive humidity.
In places subject to vibrations or bumps.
In places with a temperature of over 45 C/113 F or less than 2 C/35.6 F.
Protect the unit from excessive dryness or humidity (ideal conditions are between
35% and 80%).
DO NOT dismantle or modify the unit.
Page 2