17C
4-3 Programming Chase
You must program scenes before you can program chases, this function
allows you to store up to 240 scenes into one chase.
1. Program enable.
2. Tap the Chase button to select the chase to program. Each
time you can select a chase only.
3. Select a desired scene from the bank that has stored
scenes.(described in Programming Scenes)
4. Tap the MIDI/Rec button.
5. Repeat steps 3-4 until you've reached your desired effect.
You may record up to 240 scenes into a chase.
4-3.1 Program a bank of scenes into a Chase
1. Program enable.
2. Select the chase using Chase buttons 1-6.
3. Use Bank Up/Down button to select the bank that contains
the scenes you wish to copy.
4. Tap the Music/Bank Copy button.
5. Tap the MIDI/Rec Copy button, all LEDs will flash three times
briefly indicating all 8 scenes in this bank have been
programmed into this chase.
Page 15
4-3.2 Add a Step
1. Program enable.
2. Select the chase you wish to add a step to.
3. Tap the Tap/Display button, the LCD shows the current step.
4. Tap the Bank Up/Down button to scroll to the step you wish to
add a step after.
5. Tap the MIDI/Rec button, the Segment Display will read the
step one higher than before.
For example, if you want to insert a step between step 3 and
step 4, and you scroll to step 3, when you tap the MIDI/Rec
button, the LCD will read "STEP 004".
6. Tap the Tap/Display button again, the LCD shows the current
chase, scene and bank.Create a desired scene and record it as
a new step or select a programmed scene you wish to add into
this chase.
Hints:
You may tap the Tap Sync/Display button to change the display
mode between step and the bank.
Page 16