4A
1.
POWER INPUT:
AC 230V 50Hz (BF-1500ND B)
AC 230V- 50Hz/120V-60Hz (BF-750ND B)
2.
FUSE:
20A/15A
3.
DMX IN:
XLR male socket, use to receive DMX signals.
4.
DMX OUT:
XLR female socket, use to transmit DMX signals.
5.
Remote controller input:
By connecting to the 1/4
“microphone jack to
control
the unit for Stand by, Function and Mode.
6.
DMX DIP SWITCH:
Dip switch 1-9 are used to set DMX address of the unit.
Assign dip switch 1 ON, this unit is in master mode, assign dip switch 1 and 10
ON at the same time to adjust dimmer and strobe speed.
7.
DIMMER:
This knob used to adjust brightness of the units.
8.
SPEED:
This knob used to adjust the speed of Strobe.
5. How To Change The Lamp
•
Always switch off the main supply and never handle the lamp or luminaire when it
is hot.
• Do not touch
the bulb with bare hands. If this does happen, clean the lamp with
denatured alcohol and wipe with a lint free cloth before installing.
• Remember always replace
the lamp with the same type lamp.
1. Loose the screws on the
metal base at bottom.
