57
4
Making settings
easy
Determining, which telephone number will be transmitted
The EURACOM automatically transfers your telephone number to your conversati-
on partner, without the need for programming anything. With a single
PABX connec-
tion this works without problems in any case. In case of a multiple subscriber con-
nection, several PABX connections with different telephone numbers or a combina-
tion of PABX connection and multiple subscriber connection in some rare cases not
the right telephone number may be transferred. In your telephone bill from your
network provider, showing all calls, the charges are then assigned to this number. If
you want to guarantee, that the right number will always be transferred, you should
program this for your telephone. It is also possible to make this setting in the PC
program (<PABX configuration program> <Configuration> <Subscriber configurati-
on>). In case of multiple subscriber connection the EURACOM transfers the
multiple
subscriber number, in case of PABX connection the PABX number plus your direct
dialling in number.
If you purposeful select the external line of a multiple subscriber connection (-->
page 14), in any case the multiple subscriber number, you are then entering, will be
transferred.
The telephone number will not be transferred, if you have switched off the telepho-
ne number transfer (--> page 56).
Dialling via a PABX connection
+
#*50
eg
1
With this procedure you determine the
basic
access your telephone is “making external calls”
from. If this is engaged by two conversations, the
EURACOM shall:
1
use the next free basic access and transfer
the corresponding telephone number.
2
not use another basic access. You receive a
line busy signal.
eg
0
0
The basic access designated for use, belongs
to a single PABX or a master PABX of two
networked PABXs.
1
The basic access designated for use, belongs
to a slave PABX of two networked PABXs.
eg
4
1,2,3 or 4: Number of the basic access, your
telephone shall “make external calls” from. If you
do not know the number, read the configuration
via the PC (ISDN ports) or consult your distributor.
#
-
Your telephone number is now being
transferred as determined by yourself. If the
EURACOM shall assign the telephone number
again automatically, lift the receiver and dial
#
*
500#.
