Important notes to start with
Our contribution to environmental protection
•
This instruction manual is printed on chlorine-free paper.
•
All plastic parts of your PABX consist of fully recyclable material (PC+ABS-FR).
Attachment to EURACOM Manuals
•
Supplementary Services, mentioned in the documentation, may not be abvailable in
all countries and areas. Please consult your local distributor for further informations
and for assistance.
•
Description of Least Cost Routing (LCR) functionality (--> „Configuration manual“
pag. 74 - 79) is based on implementation for Germany. Due to the fact, that not all
countries offer the possibility of network provider selection by the subscriber on a
call-by-call basis, the described routing algorithm and assigned procedures may not
be available in your country.
•
Caller-ID, showing the caller number on the display of an analogue telephone or a
separat monitor, is dependent at least from two major basic requirements:
1.
Telephone with Caller-ID implementation according to ETS 300 659-1.
Implementation is according to German standard with FSK-transmission
between first and second ringing signal, using no polarity reversal methode.
2.
Advice of charge (AOC-D) (--> pag. 64) during connection has to be switched
by your network provider (normally has to be applied for separately) and has to
be activated in your EURACOM by the subscriber.