background image

35

3

Mehr als nur

T

elefonieren

3

More than only

telephone calls

Switching off call forwarding in case of PABX connection

+

#9

eg

 

1

Mode of call forwarding to be switched off:

1

Call forwarding “unconditional”

2

Call forwarding “on busy”

3

Call forwarding “no reply”

eg

 

1

1,2,3 or 4: number of the basic access, the
PABX telephone number belongs to.
If you have only one basic access, you then
enter 1. In case of two basic accesses read the
configuration via PC (ISDN ports) or consult your
distributor.

eg

 

0

Service identifier (descriptions see page 33
“Switching on call forwarding in case of
PABX connection”): Service not to be forwarded
any more. If you do not enter anything here, the
call forwarding for all services will be switched off.

#

-

You have now switched off call forwarding.

Switching off call forwarding in case of multiple subscriber connection

+

#6

eg

 

1

Mode of call forwarding to be switched off

1

Call forwarding “unconditional”

2

Call forwarding “on busy”

3

Call forwarding “no reply”

eg

 

1

1,2,3 or 4: number of the basic access, the
multiple subscriber number belongs to.
If you have only one basic access, you then
enter 1. In case of two basic accesses read the
configuration via PC (ISDN ports) or consult your
distributor.

eg 

0

Number from 0 to 9: index of multiple subscriber
number, for that you intend to clear call forwarding.
The assignment of index to multiple subscriber
number was specified during configuration.

eg

 

0

Service identifier (descriptions see page 33
„Switching on call forwarding in case of  PABX
connection”): 

Service not to be forwarded any

more. If you do not enter anything here, the call
forwarding for all services will be switched off.

#

-

You have now switched off call forwarding.

Being obtainable everywhere: call diversions

Содержание euracom 141







































































































Отзывы: