USER MANUAL 16-2090
Rev. 09/2017
Page 11 of 27
Type of press
Short press
Long press
No action
No action
Brig
Brig
Brightness -
Brightness -
Light source - Intensity +
Light source - Intensity +
Light source - Intensity -
Light source - Intensity -
Peripheral 1
Peripheral 1
Peripheral 2
Peripheral 2
Mirror
Mirror
Freeze frame
Freeze frame
Recording images on the camera
(if equipped with an integrated recorder)
AWB
Record / Stop video recording on the camera
(if equipped with an integrated recorder)
Insufflator (RUN / High Flow Rate / STOP)
Light source (ON / OFF)
(a) Recording images on the PC
Recording images on the camera
(if equipped with an integrated recorder)
(b) Record / Stop video recording on the PC
Record / Stop video recording on the camera
(if equipped with an integrated recorder)
(a) Recording images on the PC
(b) Record / Stop video recording on the PC
By default, the following configuration is applied (factory setting):
B1 (short press / long press): Brightness - / Light source.
B2 (short press / long press): Brightness - / Insufflator.
B3 (short press / long press): No action / AWB.
Mirror mode: an “M” is displayed on the monitor to indicate that the mirror mode (inverted
image) is active, and disappears when it is deactivated.
Freeze mode: an “F” is displayed on the monitor to indicate that the freeze mode is active,
and disappears with it is deactivated.
6.3 White balance
The white balance can be set in 2 ways:
•
From the touch screen interface, click the white balance button.
•
From one of the camera head buttons, depending on your programming (only possible
with long press).
