USER MANUAL 16-2090
Rev. 09/2017
Page 10 of 27
6 Operating guidelines
6.1 Selecting the surgical specialty
This camera can be used in various mini-invasive surgical operations.
Select the specialty from the pre-entered list. This loads the video parameters for the
application accordingly:
LAPAROSCOPY
HYSTEROSCOPY
CYSTOSCOPY
ENT
ARTHROSCOPY
FLEXIBLE ENDOSCOPY
Note 1:
Each of these specialties can be accessed by scanning the Fusion Card on its
dedicated area
Z1
on the control unit. This can be done at any time. If the Fusion Card is
scanned while a surgical operation is in progress, then confirmation will be requested.
Note 2:
If you have entered customized parameters into a user profile beforehand, then you
can
select this user profile either by using the “Log in” button, or by scanning your personal
Fusion Card on the dedicated area
Z1
of the control unit if the control unit is linked to your
personal profile.
6.2 Configuring the functions of the camera head buttons
This operation is performed on the corresponding page of the menu interface, which can be
accessed from the dedicated “Camera head” button:
Click the button you wish to configure (B1, B2 or B3).
Select the type of press (short press or long press) and the corresponding function desired,
and confirm.
Repeat this procedure for each of the three buttons.
The configuration selected for each of the three buttons will be entered into the user’s personal
profile.
Below is the comprehensive list of the configurable functions:
