ACIQ ACIQ-12W-EZ115, Руководство пользователя и инструкция по установке

Страница: 11 / 17

Choose a location where the indoor unit will be installed. Pick a location that has
at least 6'' of clearance from the top of the ceiling and 5'' from each side of the air
handler. Make sure the installation location in not in direct sunlight, away from
any obstacles that may block air circulation, and at least 3ft away from any other
electronic devices.
Locate the carboard wall template included with the indoor air handler. Using a
level, make sure the template is straight and level before attaching to the wall.
Using painters tape, attach the template to the wall the air handler will be installed
on.
Using the template, mark and drill the holes for the mounting plate to attach to
the wall. Also mark and drill the center point for the 3.5 hole to the outside. When
drilling through the wall, drill at a slight downward angle to help pass through the
lineset, communication wire, and drain tubing bundle.
Remove the wall template.
Locate the metal wall bracket attached to the backside of the indoor air handler.
From the factory, it is attached to the air handler with a sheet metal screw. The
screw is located near the center of the air handler. Remove the screw and wall
bracket from the air handler.
Using the included mounting hardware, install the wall anchors and screw the wall
bracket into the predrilled holes in Step 4.
Pass the wall sleeve through the wall from inside to outside. From the outside, mark
the wall sleeve where it meets the outside wall. Remove the wall sleeve from the
inside and cut the sleeve down to size at the location just marked. This will make a
flush fit for the wall sleeve and allow for the outdoor beauty cap to be installed on
the outside wall.
Reinstall the wall sleeve from the inside of the wall opening.
On the indoor air handler, locate the refrigerant line and drain tubing connections
on the back side of the unit. Carefully bend the connections outward to prepare
them to pass through the wall.
INSTALLATION
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.