MOD9000BNT BACnet Receiver Installation & Configuration
AUTOMATION COMPONENTS, INC Version : 1.0
2305 Pleasant View Road I0000674
Middleton, Wisconsin 53562
Page 17 of 37
www.workaci.com
(888) 967-5224
Enter a POINT NAME, if desired, for the data point by typing the name in the
Cell. Enter the name in the cell by using the mouse to click on the next
column.
Note: DO NOT use commas or semicolons in the Point Name
Assign a sensor/transmitter to the data register by clicking in the
TRANSMITTER ID cell to open a drop down menu. This is the device ID of
the remote output devices (RD2402 & RD2432). Use the scroll bar to scroll
to the correct address, or automatically scroll to the address by typing the
hexadecimal address in the cell. To select the address click on the appropriate
ID in the drop down menu.
Assign the appropriate digital or relay output “TRANS CHAN” to the data
register by clicking in the cell to open a drop down menu. Click on the
appropriate transmission channel (01 to 04) to select.
