ACESOL Classic Series, Инструкция по установке. Инструкция по использованию.

Страница: 16 / 36

The ACESOL radiators do not need specific maintenance, however we suggest:
- Keep the air passages clean / Dust the radiator periodically with a soft dry cloth /
When it is very dirty, clean with a cloth with an un-abrasive detergent. / Always clean
when cold and avoid using solvents.
The extensive Official Services ACESOL Network guarantees correct technical
assistance. If you see an anomaly in the appliance, please get in touch with any of the
official services, where you will be duly dealt with. Any work done by those not
pertaining to the
ACESOL Official Services will oblige us to annul the guarantee.
For any questions regarding ACESOL products, contact one of our After Salesoffices
(Spain only) or your dealer(rest of world).To find your nearest dealer, visit our
websites: www.acesol.net \ www.elcalorazul.com
- When not using the appliance for extended periods of time, it should be returned to its
original packaging and stored in a dry,dust-free place.
- EU regulations and our commitment to future generations oblige us to recycle used
materials; please remember to dispose ofall superfluous packaging materials at the
appropriate recycling points,and to drop off obsolete equipment at the nearest waste
management point.
THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR DAMAGE TO
PERSONS AND/OR PROPERTY RESULTING FROM THE FAILURE TO COMPLY WITH
THESE INSTRUCTIONS.
ACESOL THE BLUE HEARHT RESERVES THE RIGHT TO MODIFY THE PRODUCT
WITHOUT PRIOR NOTICE.
Weather and corrosion proof injected aluminium body , perfectly designed for
optimum heat transfer (they are not deteriorated by the passage of time, keep their
aspect unaltered and are not affected by the environment or their liquid contents).
Reinforced resistances out of AISI-304 stainless steel tube, offering high heat
conductivity, low electricity consumption and a moisture-proof system.
Omnipolar switch hidden in the back part of the equipment, thus avoiding accidental
activation.
* An exclusive PID, more advanced than the traditional PIDs, has been developed to significantly
improve control and response speed of our emitters.
* ABS refers to the type of component, V0 being the value in the scale measuring behaviour with regard
to fire (whether it catches fire when a flame is brought close and this remains alight or if it goes out after a
few seconds, if it does not go out and drips, etc.). V0 corresponds to the most demanding quality level
(self-extinguishing) in such a way that it burns while a flame is kept in contact with the plastic material.
When removed, the flame goes out almost instantly without dripping any waste.
* It maintains all its properties throughout time, conserving its optimum performance and excellent
thermoelectric transfer, this being fast and uniform, apart from presenting very low vapour pressure,
avoiding the tendency of conventional thermal fluids to form gas pockets that generate cavitations.
8. Maintenance.
9. Technical Assistance.
10.Removal from service,
disposal and recycling.
English
EN
Classic
ACESOL
-
Installation manual - Instructions for use
16