55
English
Problem
Possible Solution
Power LED is flashing
amber, is solid blue, and
Temp LED is flashing amber
y
The projector has overheated. The display automatically
shuts down. Turn the display on again after the projector
cools down. If the problem persists, contact Acer.
y
If the projector fan fails, the projector will automatically shut
down. Clear the projector mode by pressing and holding the
Power
button for 10 seconds. Please wait for about 5 minutes
and try to power up again. If the problem persists, contact
Acer.
The remote control is not
operating smoothly or
works only within a limited
range
y
The battery may be low. If so, replace with a new CR2025
battery.
Status Indicators
Projector
Status
Description
Power
(Blue / Amber)
Temp
(Amber)
Lamp
(Amber)
Standby
mode
Projector in Standby mode.
Ready to power on.
Amber
OFF
OFF
Power on
Projector in Normal mode,
ready to display an image.
Blue
OFF
OFF
Projector
overheated
Air vents might be blocked
or ambient temperature may
be above 35
º
C. The projector
automatically shuts down.
Ensure that the air vents are not
blocked and that the ambient
temperature is within operational
range. If the problem persists,
contact us.
Amber flashing Amber
OFF
Fan
breakdown
One of the fans has failed. The
projector automatically shuts
down. If the problem persists,
contact us.
Amber flashing
and Blue ON
Amber flashing
(0.5 seconds
off,
2 seconds on)
OFF
LED failure
LED shutdown.
Amber flashing OFF
Amber
Note:
If the projector fan fails, the projector will automatically shut down. Reset the projector mode
by pressing and holding the
Power
button for 10 seconds. Please wait for about 5 minutes
and try to power up again.