26 English
Setup
Setup
English
Language
Boot-up Source
Direct Power On
Select
Exit
Enter
Sleep Timer (Hours)
Advanced
Reset
Auto
Off
Language:
Set the language for the OSD.
Boot-up Source:
Select the projector’s boot-up source. Options are:
Auto
,
VGA
,
Video
,
HDMI
, and
Media
.
Note:
If set to Auto the last source used will be displayed.
Direct Power On:
Choose
On
to activate Direct Power mode. The projector will
automatically power on when AC power is applied, without pressing the
Power
button on the projector control panel or on the remote control.
Sleep Timer (Hours):
Set the sleep timer duration. The sleep timer will start with or
without a video source. The projector will automatically shut off after the selected
time. Options are:
Auto
,
Off
,
0.5
,
1
,
3
,
8
,
12
.
Note:
If the Sleep Timer is set to“Auto” then the project will automatically power off after 15
minutes if no video source has been detected.
Reset:
Reset all settings to the factory default, including computer sources and
video source settings. After choosing this option, a confirmation message appears
on the screen. Select
Yes
to confirm or
No
to cancel reset.
Reset
No
Reset?
Yes
