![background image](http://html.mh-extra.com/html/acer/veriton-m6610/veriton-m6610_service-manual_2838221030.webp)
22
Chapter 2
Security
Parameter
Description
Option
Supervisor Password
This item indicates whether a supervisor password has been set. If the password has been
installed, Installed displays. If not, Not Installed displays.
User Password
This item allows you to change user password.
HDD Password
This item indicates whether a HDD password has been set. If the password has been installed,
Installed displays. If not, Not Installed displays.
Change Supervisor
Password
You can select this option and press <Enter> to access the sub menu. You can use the sub
menu to change the supervisor password.
Change HDD Password
You can select this option and press <Enter> to access the sub menu. You can use the sub
menu to change the HDD password.
TPM Support
This item is set to support TPM (Trusted Platform Module) funtion.
Enabled
Disabled
TPM State
This item displays the TPM status to be enabled/disabled.
Enabled
Disabled
TPM Operation
This item shows the information of the TPM operation.
TPM Enabled Status
This item displays the TPM status to be enable/disable.
Enabled
Disabled
TPM Active Status
This item displays the TPM status to be active or not.
TPM Owner Status
This item displays the TPM to be owned or not.
Removable Device Boot
This item enables or disables support the boot from USB mass storage
devices.
Enabled
Disabled
Chassis Open Warning
This item enables or disables the warning if the case is opened up, and
the item belowindicates the current status of the case.
Enabled
Disabled
Clear
Chassis Open
This item indicates whether the case has been opened.
Yes
No
Содержание Veriton M6610
