![background image](http://html.mh-extra.com/html/acer/veriton-m6610/veriton-m6610_service-manual_2838221011.webp)
Chapter 1
3
•
3.5” SATA/SATAII/SATAIII HDD
•
Combo/ DVD supermulti/Blue-ray DVD ODD
•
RAID/AHCI/IDE mode option
•
Default AHCI mode.
LAN
•
Controller: Intel 82579LM co-lay Gbt LAN controller/PHY.
•
RJ-45 Back panel port with Link/Activity LEDs.
•
Need support Wake up on LAN function, including from S3,S4,S5,S3->S5, power button off (non-ACPI
OS).
•
Need support Wake up on LAN function and ASF 2.0.
Audio
•
Chip : HD audio codec ALC662-VC HD codec 5.1
•
Connectors support:
•
Rear 3 jack follow HD audio definition (ALC662-VC).
•
Audio jacks color coding: should meet Microsoft Windows Logo Program Device Requirements:
Audio-0002.
•
1 front panel audio header (2*5).
•
1 internal speaker header (2*4).
•
S/N ration: 90dB at rear output jack.
•
1 front panel audio header (2*5).
•
Follow Acer Audio spec v4.1 & audio C/R should support Acer Internal speaker spec.
•
BIOS should meet MS Pin Configuration Guidelines for High Definition Audio Devices.
•
One earphone and one microphone jack is required on front bezel.
•
3 HD audio plugs on rear panel.
•
One 4*1 SPDIF internal header closed to PCIEx16 slot.
•
Auto detection and re-tasking behavior is following Acer Audio Jack spec.
USB ports
•
Controller: 6 Series Express Chipset (Cougar Point)
•
Ports Quantity: 14
•
6 back rear ports(USB2.0 * 6 ports)
•
On-board: 4 2*5 headers ( 8ports)
•
4 ports for front daughter board
•
4 ports reserved
•
Connector Pin: standard Intel FPIO pin definition
•
Data transfer rate support:
•
USB 2.0/1.1
•
All USB ports must be boot-capable includes USB-ODD, USB-HDD, USB-FDD, and etc…
•
All USB ports must provide the over current protection.
•
The pin connector should be located on upper if Virginia is placed on horizontal.
•
Enable the USB EHCI Debug Ports
FDD
•
Slot Quantity: 1
•
Design Criteria:
Содержание Veriton M6610
