Acer R310-U-P3200 - Altos - R310 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 124

background image

v

Important safety instructions

Read these instructions carefully. Save these instructions for future
reference.

1

Follow all warnings and instructions marked on the product.

2

Unplug this product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.

3

Do not use this product near water.

4

Do not place this product on an unstable cart, stand, or table. The
product may fall, causing serious damage to the product.

5

Slots and openings on the back or bottom side of the chassis are
provided for ventilation; to ensure reliable operation of the
product and to protect it from overheating, these openings must
not be blocked or covered. The openings should never be blocked
by placing the product on a bed, sofa, rug, or other similar surface.
This product should never be placed near or over a radiator or
heat register, or in a built-in installation unless proper ventilation
is provided.

6

This product should be operated from the type of power indicated
on the marking label. If you are not sure of the type of power
available, consult your dealer or local power company.

7

Do not allow anything to rest on the power cord. Do not locate
this product where persons will walk on the cord.

8

If an extension cord is used with this product, make sure that the
total ampere rating of the equipment plugged into the extension
cord does not exceed the extension cord ampere rating. Also,
make sure that the total rating of all products plugged into the
wall outlet does not exceed the fuse rating.

9

Never push objects of any kind into this product through chassis
slots as they may touch dangerous voltage points or short out
parts that could result in a fire or electric shock. Never spill liquid
of any kind on the product.

10 Do not attempt to service this product yourself, as opening or

removing covers may expose you to dangerous voltage points or
other risks. Refer all servicing to qualified service personnel.

11 Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

BB!S421!.!FO/cppl!!Qbhf!w!!Gsjebz-!Nbsdi!23-!3115!!5;1:!QN

«
...
3
4
5
6
7
...
»

Содержание R310-U-P3200 - Altos - R310





























































































































Отзывы:

Нет отзывов

Похожие инструкции для R310-U-P3200 - Altos - R310

Бренд: Sun Fire Страницы: 66

Бренд: Pathos Acoustics Страницы: 26

xPort Pro XPP1004000-02R

Бренд: Lantronix Страницы: 17

Бренд: LiveU Страницы: 14

Бренд: TYAN Страницы: 70

SuperServer 5037C-i

Бренд: Supermicro Страницы: 88

System x3650 M4 BD Type 5466

Бренд: IBM Страницы: 786

Бренд: Premio Страницы: 2

Бренд: Altos Страницы: 104

Бренд: Inspur Страницы: 2

Бренд: Digi Страницы: 118

Бренд: Acnodes Страницы: 1

Бренд: Acksys Страницы: 24

Бренд: Zonet Страницы: 2

PS121v2 - USB Mini Print Server

Бренд: NETGEAR Страницы: 50

Бренд: NETGEAR Страницы: 124

Digital Entertainer HD EVA8000

Бренд: NETGEAR Страницы: 114

Бренд: Biamp Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды