![background image](http://html.mh-extra.com/html/acer/imedia-s3811/imedia-s3811_service-manual_6214027.webp)
21
u
AHCI Port1 /Port2
Your computer has one IDE channel which can be installed with one or two devices
(Master and Slave). In addition, this motherboard supports two SATA channels and
each channel allows one SATA device to be installed. Use these items to configure
each device on the IDE channel.
Press <
Enter
> to display the IDE submenu:
CMOS Setup Utility-Copyright( C ) 1985-2009, American Megatrends, Inc.
SATA Port 1
AHCI Port 1
Item Help
----------------------------------------- ------------------------
Device :
Vendor:
Size:
Hard Disk
ST3320418AS
320.0GB
S.M.A.R.T. stands for
Self-Monitoring,
Analysis and Reporting
Technology.
----------------------------------------- ------------------------
S.M.A.R.T.
[Enabled]
↑↓→←:
Move Enter
:
Select +/-/
:
Value F10
:
Save & Exit Setup
Esc
:
Exit F1
:
General Help F9
:
Load Default Settings
SATA Port0 (Auto)
Use this item to configure the type of the IDE device that you specify. If the feature is enabled, it will enhance
hard disk performance by reading or writing more data during each transfer.
S.M.A.R.T. (Enabled)
The S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) system is a diagnostics technology that
monitors and predicts device performance. S.M.A.R.T. software resides on both the disk drive and the host
computer.
Press <Esc> to return to the Standard CMOS Setup page.
Halt On (All, But Keyboard)
This item defines the operation of the system POST (Power On Self Test) routine. You can use this item to
select which types of errors in the POST are sufficient to halt the system.
Press <Esc> to return to the main menu setting page.
Содержание imedia S3811
