Acer AW2000h-AW175h F1, Руководство по обслуживанию

Страница: 57 / 106

Hardware removal and installation 51
b. Push the DIMM to the socket until the retaining clips snap inward.
NOTE: The DIMM slot is slotted to ensure proper installation. If you insert a DIMM but it does not fit easily into
the socket, you may have inserted it incorrectly. Reverse the orientation of the DIMM and insert it again.
6. Reconfigure the system memory. See below for more information.
Memory removal
IMPORTANT: Before removing any DIMM from the mainboard, make sure to create a backup file of all
important data.
1. Remove the memory module.
a. Press the holding clips on both sides of the DIMM slot outward to release the DIMM.
b. Gently pull the DIMM upward to remove it from the DIMM slot.
2. If you intend to install a new memory module, refer to the previous section.
To reconfigure the system memory:
The system automatically detects the amount of memory installed. Run the BIOS setup to view the new value
for total system memory and make a note of it.