Acer Altos G320 Series, Руководство пользователя

Страница: 40 / 132

3 System upgrade 30
To install a 5.25-inch storage device
Note: If you are installing a storage device on an empty 5.25-inch
drive bay, you must remove the blank plastic front on the front
bezel first.
1 Observe the ESD precautions and pre-installation procedures
described on page 25.
2 If you are installing a device on an empty 5.25-inch drive bay, you
must remove the bay cover first. If not, then go to step 3.
To remove the bay cover:
Remove the two screws that secure the cover to the empty bay,
then detach the cover.
3 Push the lever in the direction of the unlock icon (1) .
4 Install a new 5.25-inch drive into the bay (2) , then push the lever in
the direction of the lock icon (3) .
5 Connect the IDE data (4) and power (5) cables to the new drive.
6 Observe the post-installation instructions described on page 26.
AA G320_UG_EN.book Page 30 Tuesday, August 30, 2005 2:34 PM