Control Panel
NOTICE:
•
Water bucket must be correctly installed for the dehumidifier to operate.
•
Do not remove the bucket while unit is in operation.
•
If you want to use drain hose to drain water away, please install the hose according to section
"Drainage option".
•
Each time pressing the effective button on the control panel will give out a "beep" sound.
•
When power is connected, power indicator on the control panel will be on and dehumidifier gives
out a “beep” sound sim
ultaneously.
Basic Functions of the Control Panel
1.
POWER
Press to turn the dehumidifier on and off.
2.
FILTER
After 250 hours of operation, the filter indicator light will glow to remind you to clean the filter. Remove
the filter and clean it. See the Clean and Maintenance section.
Once the filter is clean, press the filter button for several seconds to turn off the filter light.
3.
+/-
The humidity level can be set within a range of 80% RH (Relative Humidity) to 35% RH (Relative Humidity)
with 5% reduction or at continuous operation.
To set the unit for continuous operation, press the - button until the screen reads NS.
